ENGL.1010 College Writing I (3cr)
A workshop course that thoroughly explores the writing process from pre-writing to revision, with an emphasis on critical thinking, sound essay structure, mechanics, and academic integrity. Students will read, conduct rhetorical analyses, and practice the skills required for participation in academic discourse. Students will write expository essays throughout the semester, producing a minimum of four formal essays.
ENGL.1020 College Writing II (3cr)
A workshop course that thoroughly explores the academic research writing process with an emphasis on entering into academic conversation. Building on the skills acquired in College Writing I, students will learn to write extensively with source material. Key skills addressed include finding,assessing, and integrating primary and secondary sources, and using proper documentation to ensure academic integrity. Students will produce analytical writing throughout the semester, including a minimum of four formal, researched essays.
ETEC.1300 Electrical Basics and Laboratory (3cr)
This course introduces the basic principles of electrical engineering, including the concepts of voltage, current, resistance, inductance and capacitance. Ohm's Law, Kirchhoff's Laws, superposition, Thevenin's theorem, and Norton's theorem will be covered. Alternating current concepts, frequency response and filters are discussed. The use of laboratory power supplies and measuring instruments such as oscilloscopes, voltmeters, ammeters and ohmmeters are demonstrated. Written reports are required.
Requirements:
MATH.1250
ETEC.1310 Electronic Basics and Laboratory (3cr)
The Electronic Basics and Laboratory serves as a continuation and elaboration of 17.130. The course covers diodes, transistors and electronic amplifiers, power supplies, Magnetics and electromechanics. Further use of laboratory equipment, function generators, power supplies, DMM and oscilloscope will be demonstrated.
Requirements:
ETC.1300
MATH.1225 Precalculus Mathematics I (3cr)
This course prepares students for future Calculus coursework. Topics covered include: linear equations, slope of a line, quadratic equations, functions, transformations, inequalities, curve sketching, and systems of equations. Credit is given for only one of the following courses; MATH.1205, MATH.1210, MATH.1225.
MATH.1230 Precalculus Mathematics II (3cr)
A continuation of Math 1200/1225. Covers exponential and logarithmic functions, trigonometric and inverse trigonometric functions, and trigonometric identities.
Requirements:
MATH.1210
MATH.1250 Calculus A (3cr)
Serves as a first course in calculus and provides a brief review of analytic geometry and trigonometric functions. The course progresses to the study of inverse functions, limits, continuity, derivatives, rules for differentiation of algebraic and transcendental functions, chain rule, implicit differentiation, linear approximation, differentials, and maximum and minimum values.
Notes:
MA. Students may receive credit for only one of the following courses: MATH.1220 or MATH.1310.
Requirements:
MATH.1230
MATH.1260 Calculus B (3cr)
Serves as a continuation of MATH.1250. The course covers L'Hopital's Rule, optimization problems, Newton's method, sigma notation, integration, area between curves, volume, arc length, surface area, integration by parts, trigonometric substitution, partial fraction decomposition, and improper integrals.
Notes:
MA
Requirements:
MATH.1250
MTEC.1020 Engineering Design and Graphics (3cr)
This course presents material in both class and laboratory format. Topics covered include: dimensioning, print reading, auxiliary views, graphs, screw threads, gears, and the design process. Working in teams, a major design project with written and oral reports is required.
MTEC.2000 Computer Aided Drafting (CADrf) (3cr)
This course introduces the student to the use of CAD for construction of basic shapes and multi view drawings. It is a project oriented course introducing the student to graphic design using AutoCAD. AutoCAD, as it is applied in MTEC.2000, is a two dimensional CAD program used to produce computer design models. Course stresses hands-on work with AutoCAD. Course is a fundamentals approach and requires no experience with other CAD programs.
Requirements:
MTEC.1020
MTEC.2020 Thermo/Fluids Laboratory (2cr)
The course covers the theory and the practical relevance of selected principles of thermo-fluids and fluid mechanics. Fundamentals of measurement and interpretation in the areas of thermo-fluids and fluid mechanics will be studied. The student will be responsible to collect data with the supplied test apparatus, interpret the physical significance of the data, in relation to the laws and principles of thermo/fluids, and to report findings. Strong emphasis is placed upon developing technical report writing skills.
Notes:
3 Contact Hrs
Requirements:
MTEC.2410, MTEC.2420, MTEC.2260 or ENGL.2260
MTEC.2210 Statics (3cr)
Statics is the study of objects in equilibrium and the forces acting on that object. Students will develop mathematical models to predict and analyze forces and their distributions with the use of the free body diagram. The concepts presented in this course directly relate to other mechanical and civil engineering fields. Students must have a basic understanding of trigonometry, geometry, physics and calculus. This course is in a combined section with CET.
Requirements:
MTEC.1250, PHYS.1310
MTEC.2220 Dynamics (3cr)
This course introduces the student to the kinematics and kinetics of particles, systems of particles, and rigid bodies. This course covers the basic methods of analysis including Newton's 2nd Law (force, mass, acceleration), Work and Energy, and Impulse and Momentum. This course is in a combined section with CET.
Requirements:
MATH.1260, MTEC.2210, PHYS.1320
MTEC.2230 Mechanics of Materials (3cr)
This course discusses the principles of strength of materials and the relationships between externally applied forces and internally induced stresses in various types of structural and machine members and components. Included are axial, torsional, and flexural loadings, stress-strain relationships, deformation of materials, elastic deformation, principal stresses, temperature effects, MohrÆs circle, shear and bending moment diagrams, the design of beams, and the deflection of beams.
Requirements:
MTEC.2210
MTEC.2260 Technical Communications for Engineering Technology (3cr)
This course introduces students to presenting ideas, data, and proposals in clear concise formats to maximize understanding and impact. Both written and presentation skills are stressed and familiarity with MS Word, Excel and PowerPoint is preferred but not a prerequisite. The end-product is a complete understanding of the elements which blend together to create effective communication in a technical environment.
Notes:
can be substituted for 42.226
Requirements:
ENGL.1010
MTEC.2410 Elements of Thermodynamics I (3cr)
This course presents a thorough treatment of the concepts and laws of thermodynamics. The first law (energy) and the second law (entropy), properties of liquids and gases, and common power cycles (Rankine and Otto) are covered. Included is an overview of the global energy problem and power generation technologies, both established and novel
Requirements:
MATH.1260, PHYS.1320
MTEC.2420 Applied Fluid Mechanics (3cr)
This course addresses the Properties of Fluids and basic concepts of Continuity, Momentum, Hydrostatics, and Fluid Flow Kinematics. Analysis of flow of real fluids in pipes, ducts and open channels is conducted. The study of compressible flows, fluid couplings as well as flow measurement techniques will also be discussed
Requirements:
MTEC.2220
MTEC.2950 Materials Science (3cr)
Properties of materials, selection of materials and processing of materials for appropriate applications are the focus of this course. Case studies are utilized to demonstrate failures which need not have occurred. Materials which are considered include metals and alloys, ceramics, polymers, and composites.
MTEC.3020 Mechanics/Materials Laboratory (2cr)
Methods of material testing and analysis are covered in this course with an emphasis on proper measurement procedures, data reduction, and presentation. Lectures cover the background required to perform post laboratory calculations, and overview measurement techniques, laboratory result reporting, and formal presentations that are given by students to the class.
Requirements:
MTEC.2220, MTEC.2230, MTEC.2260
MTEC.3050 Manufacturing Processes (3cr)
The course will focus upon a variety of manufacturing processes used for metals, ceramics and plastics, material interactions that occur during manufacturing, mechanical test methodology and material response to stress at different temperatures, methods to select appropriate processes to achieve product specification and methods to investigate process history based on material properties.
PHYS.1310 Technical Physics I (3cr)
Presents material in both the class and laboratory format. Topics include: vectors; one- and two- dimensional motion; Newton's laws of motion; translational and rotational equilibrium; work and energy; linear momentum; and circular motion and gravitation. Two additional Friday night classes are required.
PHYS.1320 Technical Physics II (3cr)
Covers material in both the class and laboratory format. Rotational dynamics; mechanical vibrations and waves; sound; solids and fluids; thermal physics; heat and law of thermodynamics will be discussed. One session per week. Two additional Friday night classes are required.
Notes:
SL
Requirements:
PHYS.1310
PSYC.1010 Introduction to Psychological Science (3cr)
An introduction course that focuses on application of the scientific method to major areas of psychology: biological, cognitive, developmental, social and personality, and mental and physical health. The course addresses the importance of social and cultural diversity, ethics, variations in human functioning, and applications to life and social action both within these areas and integrated across them. The research basis for knowledge in the field is emphasized.