Available as a mix of on-campus and online courses!

Associate of Science in Electronic Engineering Technology

Advance your career in electronics with UMass Lowell’s blended on-campus and online Associate's Degree in Electronic Engineering Technology.

Get Information:

Please see our Privacy Policy.
Please see our Privacy Policy.
The Scales of Justice
Alarm Clock Next Start Date: May 13
Summer Scholarships Available. Learn more »

Blended On-Campus and Online Associates Degree in Electronic Engineering Technology

Learn about the fundamentals of circuit design, voltage, semiconductor devices, theory vs. simulation, transistors, microprocessors and more through UMass Lowell’s Associate’s Degree in Electronic Engineering Technology. With a mix of on-campus engineering and online elective courses, the program will prepare you to succeed in various fields, including consumer electronics, telecommunications, and semiconductors. With over 35,000 job postings across the country, there is a strong demand for those who understand the design, testing, and manufacturing of hardware and software for all things electrical. Credits earned through the Associate’s degree can be applied to the Bachelor of Science in Electronic Engineering Technology.

Note: Although some of the courses in this program can be completed online, most of the courses are only available on campus.

12 month calendar

Complete in as Little as 12 Months

hand and coin

One of the Most Affordable Tuitions in the Nation

Career Outlook

36,388M
Jobs (2021)
$66.4K/yr
Median Earnings
4,158
Annual Openings
Source: Lightcast, 2022

One Success Leads to Another

Apply credits from lower credentials to higher ones. Our programs are designed to build upon themselves:

Curriculum Outline

- Total Credits: 66
- View Course Descriptions »

Suggested Program of Study - (22 Courses / 66cr)

Students enrolling in this program should purchase an electronic calculator capable of handling logarithmic and trigonometric functions. The use of the calculator will be an integral part of courses ETEC.2130 and ETEC.2140, where proficiency will be developed.

Competency in the use of the calculator will be assumed in all subsequent E.E.T. courses.

Proper approval for a ETEC.3/4-- course is automatically assumed if all prerequisites are satisfied.

Course Descriptions

ENGL.1010 College Writing I (3cr)

A workshop course that thoroughly explores the writing process from pre-writing to revision, with an emphasis on critical thinking, sound essay structure, mechanics, and academic integrity. Students will read, conduct rhetorical analyses, and practice the skills required for participation in academic discourse. Students will write expository essays throughout the semester, producing a minimum of four formal essays.

ENGL.1020 College Writing II (3cr)

A workshop course that thoroughly explores the academic research writing process with an emphasis on entering into academic conversation. Building on the skills acquired in College Writing I, students will learn to write extensively with source material. Key skills addressed include finding,assessing, and integrating primary and secondary sources, and using proper documentation to ensure academic integrity. Students will produce analytical writing throughout the semester, including a minimum of four formal, researched essays.

ETEC.2130 Electric Circuits I (3cr)

Discusses: electrical circuits; voltage, current and resistance; energy, power and charge; Ohm's Law, Kirchhoff's Current Law and Kirchhoff's Voltage Law; simplification and conversion techniques for networks containing sources and/or resistance; Thevenin's and Norton's theorems; fundamentals of magnetism and magnetic circuits; properties of capacitance and inductance and associated transient behavior of circuits.

ETEC.2140 Circuits II and Laboratory (3cr)

This course provides a continuation of ETEC.2130. Topics include sinusoidal waveforms, phasors, impedance and network elements. Mesh and nodal analysis of AC circuits; series and parallel circuits, superposition and Wye/Delta conversions are also covered. The use of power supplies and various electrical measuring instruments will be studied. DC circuit analysis concepts studied in 17.213 will be verified by laboratory experiments. Written reports are required. Alternate lecture and laboratory sessions.

Requirements:

ETEC.2130 Electric Circuits I.

ETEC.2150 Circuits III and Laboratory (3cr)

This course serves as a continuation of 17.214. Topics to be discussed include maximum power transfer, real and reactive power; resonance; and polyphase systems. Oscilloscopes, voltage, current and phase measurements are demonstrated. Other topics include series and parallel sinusoidal circuits, series-parallel sinusoidal circuits, series resonance, parallel resonance and transformers. Filters, 2-port networks, computer aided circuit analysis (PSPICE). Computer terminals will be available in the laboratory and their use is expected. Written reports are required. Alternate lecture and laboratory sessions.

ETEC.2160 Circuits IV (3cr)

Advanced Circuits is a continuation of passive circuit analysis, where the student is introduced into the frequency domain. LaPlace techniques are used to analyze electric circuits using sources and elements similar to those in earlier circuit analysis courses. The concept of boundary conditions is introduced along with initial value and final value theorems. There is a brief review of mathematical concepts such as logarithm, exponential functions and partial fraction expansion to aid the student for newer analysis techniques. The S plane is introduced as a graphical technique to plot the poles and zeros of a function and acquire an insight into the time domain. The dualities of electrical elements in other engineering fields (mechanical, fluids and thermal) are introduced and analyzed using LaPlace techniques. Bode plots are used as another tool to gain insight into the time domain. The cascade interconnect is introduced along with the concept of transfer functions and the impulse response. Filter circuits are again analyzed but this time in the frequency domain using the concepts of LaPlace and Bode.

ETEC.3550 Electronics I and Laboratory (3cr)

This course introduces Electronics from a fundamental perspective and analyses of circuits from a practical point of view. Semiconductor devices and their application are stressed. This course surveys the operating characteristics of pn junction diodes, transistors and operational amplifiers, and analyzes their application in actual circuits. The use of diodes in power switching circuits and the use of transistors in logic circuits and amplifiers will be covered extensively. Examples and homework, based on present-day applications, are designed to provide practice in the use of fundamental concepts and applications. It is expected that following the four-course electronic sequence, students will be able to use the textbook used in this course or other professional level electronic texts for further study of specific electronic topics. The course includes computer applications in solving problems involving models of electronic devices and circuits. Coverage of some topics is based on notes handed out that augments coverage in Sedra and SMith.

ETEC.3560 Electronics II and Laboratory (3cr)

This is the second course in a series of four courses with Labs. It introduces Electronics from a fundamental perspective and analyzes circuits from a practical point of view. Semiconductor devices and their application are stressed. P-and N-channel MOSFETs and junction field effect transistors (FET) will be introduced and discussed. These include linear small-signal AC models, and amplifier. This course surveys the operating characteristics of MOSFET and bipolar junction transistors (BJT) its circuit symbols; nonlinear large signal behavior and operational amplifiers, and analyses; their application in actual circuits. Large signal piecewise linear DC circuits, and small signal AC circuits will be studied. This course will include MOSFET and BJT as used in amplifiers, switches cut-off and saturation will be discussed. Examples and homework, based on present day applications, are designed to provide practice in the use of fundamental concepts, and applications. It is expected that following the four course electronic sequence, students will be able to use the textbook used in this course or other professional level electronic texts for further study of specific electronic topics. The course includes computer applications in solving problems involving models of electronic devices and circuits. Coverage of some topics is based on notes handed out that augments coverage in Sedra and Smith. Pre-Requisites: 17.215, 17.355, 42.226, 92.126

ETEC.3570 Electronics III and Laboratory (3cr)

This course introduces Electronics from a fundamental perspective and analyses of circuits from a practical point of view. It is expected that following the four course electronic sequence, students will be able to use the textbook used in this course or other professional level electronic texts for further study of specific electronic topics. The following topics will be covered: review BJT and MOSFET, differential amplifiers, and frequency response of different types of amplifiers will be discussed, diff. pair, small signal analysis, biasing, current source, active load CMOS, Frequency response, Bode Plots cascode configuration.

ETEC.3580 Electronics IV and Laboratory (3cr)

This course provides the student with the understanding of feedback. The course covers the feedback equations, the four topologies of feedback, two port theory, Bode Plots, active filters, Weinbridge Oscillators, and power amplifiers. There are two experiments the first covers finite gain, finite band width, output resistance, input resistance, and nonlinear distortion. The second covers multiple poles and loop stability, stabilization with three coincident poles, and loop gain for oscillation.

ETEC.3830 Microprocessors A (3cr)

Introduces the microprocessor and microprocessor programming through an integrated set of experiments and related lectures. Topics include: binary, decimal, and hexadecimal numbers; the microprocessor; memory devices; structure of microprocessor-based systems; programming and instruction sets; addressing modes; arithmetic, logical, and shift instructions; branch conditions and instructions; indexed addressing; the tack; subroutines; assembly language; floating-point routines; and software development techniques. Approximately one-half of the course time will be an associated laboratory, culminating with a programming project. Pre-Requisite: 17.341

Notes:

Lab components and materials need to be purchased separately.

ETEC.3840 Microprocessors B (3cr)

Extends the skills developed in 17.393 to interfacing the microprocessor to the outside world through an integrated set of experiments and related lectures. Topics include: architecture of microprocessor-based systems; microcontrollers; parallel I/O ports; interrupts; A/D and D/A converters; programmable timers; handshaking; and serial communications. The course will contain a three-week project applying the functions learned to a real world design. Approximately one-half of the course time will be an associated laboratory.

INFO.2670 C Programming (3cr)

Introduces students to the techniques of programming in C. The language syntax, semantics, its applications, and the portable library are covered. This course is an introductory course in programming. It does not assume previous programming experience.

Notes:

Students may not receive credit for both the INFO.2110/INFO.2120 sequence and INFO.2670
This course qualifies for free MSDNA software!

MATH.1225 Precalculus Mathematics I (3cr)

This course prepares students for future Calculus coursework. Topics covered include: linear equations, slope of a line, quadratic equations, functions, transformations, inequalities, curve sketching, and systems of equations. Credit is given for only one of the following courses; MATH.1205, MATH.1210, MATH.1225.

MATH.1230 Precalculus Mathematics II (3cr)

A continuation of Math 1200/1225. Covers exponential and logarithmic functions, trigonometric and inverse trigonometric functions, and trigonometric identities.

Requirements:

MATH.1210

MATH.1250 Calculus A (3cr)

Serves as a first course in calculus and provides a brief review of analytic geometry and trigonometric functions. The course progresses to the study of inverse functions, limits, continuity, derivatives, rules for differentiation of algebraic and transcendental functions, chain rule, implicit differentiation, linear approximation, differentials, and maximum and minimum values.

Notes:

MA. Students may receive credit for only one of the following courses: MATH.1220 or MATH.1310.

Requirements:

MATH.1230

MATH.1260 Calculus B (3cr)

Serves as a continuation of MATH.1250. The course covers L'Hopital's Rule, optimization problems, Newton's method, sigma notation, integration, area between curves, volume, arc length, surface area, integration by parts, trigonometric substitution, partial fraction decomposition, and improper integrals.

Notes:

MA

Requirements:

MATH.1250

MTEC.2260 Technical Communications for Engineering Technology (3cr)

This course introduces students to presenting ideas, data, and proposals in clear concise formats to maximize understanding and impact. Both written and presentation skills are stressed and familiarity with MS Word, Excel and PowerPoint is preferred but not a prerequisite. The end-product is a complete understanding of the elements which blend together to create effective communication in a technical environment.

Notes:

can be substituted for 42.226

Requirements:

ENGL.1010

PHYS.1310 Technical Physics I (3cr)

Presents material in both the class and laboratory format. Topics include: vectors; one- and two- dimensional motion; Newton's laws of motion; translational and rotational equilibrium; work and energy; linear momentum; and circular motion and gravitation. Two additional Friday night classes are required.

PHYS.1320 Technical Physics II (3cr)

Covers material in both the class and laboratory format. Rotational dynamics; mechanical vibrations and waves; sound; solids and fluids; thermal physics; heat and law of thermodynamics will be discussed. One session per week. Two additional Friday night classes are required.

Notes:

SL

Requirements:

PHYS.1310

PSYC.1010 Introduction to Psychological Science (3cr)

An introduction course that focuses on application of the scientific method to major areas of psychology: biological, cognitive, developmental, social and personality, and mental and physical health. The course addresses the importance of social and cultural diversity, ethics, variations in human functioning, and applications to life and social action both within these areas and integrated across them. The research basis for knowledge in the field is emphasized.

Notes:

BS

Program Requirements

All associate's degree candidates are required to earn a minimum 2.000 cumulative grade point average (GPA), to present a minimum of 60 semester hours, to fulfill the residency requirements, to conform to the general regulations and requirements of the University, to satisfy the regulations and academic standards of the colleges which exercise jurisdiction over the degrees for which they are matriculating, to satisfy the curriculum requirements established by the departments or programs in their major, and to complete the University's Core Curriculum requirements, which are listed within the program's curriculum outline. For additional information regarding the University's general policies and procedures, transfer credit information and residency requirements; please refer to our Academic Policies & Procedures.

Tuition & Fees

Tuition at UMass Lowell is typically half the cost of private colleges, and our online tuition is among the lowest in the nation. Tuition for online programs offered through the Division of Graduate, Online & Professional Studies is the same whether you live in-state, out-of-state or outside of the U.S.

Summer 2024 Tuition

Cost Per Credit Cost Per 3-Credit Course*

Undergraduate

Online $385 $1,155
On Campus Lowell $3551 $1,065
*Tuition is priced on the listed credit hour unless the contact hour is different. Tuition is then based upon the listed contact hour.
1A tuition increase is anticipated for Fall courses.

Additional Costs

Term Registration Fee $30
Returned Check Fee $30
Undergraduate Degree Application $60

Please note: Tuition and fees are subject to change.

hand and coin

Looking for Financial Assistance?

UMass Lowell offers a variety of financial aid and scholarship options.

Apply

Applying into an Undergraduate Degree Program

Complete the Online Undergraduate Degree Application Form (preferred), or print, complete and submit the Undergraduate Degree Application .pdf form. Please note: Your application will be processed once we have received your $60 application fee. Return your completed application along with your application fee to:

University of Massachusetts Lowell
Division of Graduate, Online & Professional Studies
GPS Admissions
839 Merrimack Street
Lowell, MA 01854

Questions? See our helpful Step-by-Step Guide to the Application Process.

Admission Requirements

To be considered for acceptance into an associate's degree program offered through the Division of Graduate, Online & Professional Studies, students must hold a high school diploma or have passed either the GED® or HiSET®. Graduate, Online & Professional Studies operates on a rolling admissions basis and each application is reviewed when the student's file is complete. Students must be admitted to a degree or certificate program in order to be eligible for most financial aid.

Apply Now

Questions Regarding Your Undergraduate Application?

Email OCE_Admissions@uml.edu or call 978-934-2474.

For General Assistance:

Call the Advising Center at 978-934-2474 or 800-480-3190. Our academic advisors are here to help!

Already Applied?

Check the Status of Your Application

Take Your Career to New Levels with a Public, Nonprofit University and a Trusted Leader in Online Education

Apply Now Request Info